There are many variations of passages of available but the have alteration in not avein that some form by injected.
Read More
There are many variations of passages of available but the have alteration in not avein that some form by injected.
Read More
Suspension wires are available in different lengths as per requirements.
Read More
we produce brass cord grip with different surface finishes like Nickle, chrome, CED black and powder coated.
Read More
we produce Cable blocker grip with different surface finishes like Nickle, chrome, CED black and powder coated.
Read More
Half Moon Stainless Steel Safety Door Stopper Floor Mount Half Dome Door Stopper Door Stop Bumper Wall Protector with Rubber Bumper, No More door Slamming! Prevents Damage to Your Doors, Walls or Baseboard.
Read More
An impeller is a rotating component of a centrifugal pump which transfers energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation. The velocity achieved by the impeller transfers into pressure when the outward movement of the fluid is confined by the pump casing. Impellers are usually short cylinders with an open inlet (called an eye) to accept incoming fluid, vanes to push the fluid radially, and a splined, keyed, or threaded bore to accept a drive-shaft.
Read More
we produce teeth swivel with key. surface finish can be done as per requirement like Nickle, chrome, black and white powder coating.
Read More
we produce electrical thimbles for LED lights. Different colors like Red, Green and Black are available with various kind of connection designs.
Read More
We provide different shapes and sizes of LED lights interior ceiling fitments made with various kind of sheet thickness. Customized sheet metal LED parts can be produced as per design/drawing. Material test certificates, product quality report and ROHS declaration are available.
Read More
Sheet metal ceiling canopies:- Material – Brass /MS/Aluminum Finishes – White/Black/Satin/Nickel/Mirror
Read More
A ball valve is a shut off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. They are characterized by a long service life and provide a reliable sealing over the life span, even when the valve is not in use for a long time. As a result, they are more popular as a shut off valve then for example the gate valve. For a complete comparison, read our gate valve vs ball valve article. Moreover, they are more resistant against contaminated media than most other types of valves. In special versions, ball valves are also used as a control valve. This application is less common due to the relatively limited accuracy of controlling the flow rate in comparison with other types of control valves. However, the ball valve also offers some advantages here. For example, the valve still ensures a reliable sealing, even in the case of dirty media. Figure 1 shows a sectional view of a ball valve.
Read More
A rocker arm (in the context of an internal combustion engine of automotive, marine, motorcycle and reciprocating aviation types) is an oscillating lever that conveys radial movement from the cam lobe into linear movement at the poppet valve to open it. One end is raised and lowered by a rotating lobe of the camshaft (either directly or via a tappet (lifter) and pushrod) while the other end acts on the valve stem. When the camshaft lobe raises the outside of the arm, the inside presses down on the valve stem, opening the valve. When the outside of the arm is permitted to return due to the camshafts rotation, the inside rises, allowing the valve spring to close the valve. Some overhead cam engines employ short rocker arms in which the cam lobe pushes down (rather than up) on the rocker arm to open the valve. On this type of rocker arm, the fulcrum is at the end rather than the middle, while the cam acts on the middle of the arm. The opposite end opens the valve. These types of rocker arms are particularly common on dual overhead cam motors, and are often used instead of direct tappets.
Read More
An exhaust flange is a piece of metal that bolts directly to the engine of your vehicle and allows for custom headers to be fabricated. They still require an exhaust gasket between the header flange and the engine/head
Read More
Sintering or frittage is the process of compacting and forming a solid mass of material by heat or pressure without melting it to the point of liquefaction. Sintering happens naturally in mineral deposits or as a manufacturing process used with metals, ceramics, plastics, and other materials.
Read More
